Retro PSV badge products

Our unique replica PSV badges have proved so popular, we’re rolling the design out to our new ceramic coaster range.

PSV badges were worn by Drivers (red) and Conductors (green) and assisted with identifying them to the public and showed they were licensed to operate or collect fares.

They were phased out in the late 80s/90s meaning that anyone who became a Driver since then wasn’t issued with one (some bus companies did continue the tradition for a few years).

However, you can now get your hands on your very own personalised PSV badge style coaster. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Each ceramic coaster is 100mm in diameter and printed and pressed here in Birmingham. There’s a large cork pad on the bottom to protect the surface of where they’re placed.

Please note, multi-buy is not available on this personalised item.

You can now get your hands on your very own personalised PSV mouse mat. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Not a Driver or Conductor? No worries, why not use your initials for the traffic area and your date of birth for the identification number.

Each mat is made from neoprene and has a non-slip surface on the back. They’re designed and printed to order with the design heat pressed to the face of the coaster.

Approx. 200mm in diameter and 3mm thick.

You can now get your hands on your very own personalised PSV car coaster. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Not a Driver or Conductor? No worries, why not use your initials for the traffic area and your date of birth for the identification number.

Each coaster is made from neoprene and has a non-slip surface on the back. They’re designed and printed to order with the design heat pressed to the face of the coaster.

Approx. 70mm in diameter and around 3mm thick. Please check the size of your cup holders before ordering. Holders in the armrest of rear seats may be smaller than the front. The ‘lift out’ notch will be on the right hand side of your coaster and not as shown.

Pre-order for dispatch from 14 August 2026

Please note - this item does not include a gift/presentation tin.

Now here’s a blast from the past! PSV badges were worn by Drivers (red) and Conductors (green) and assisted with identifying them to the public and showed they were licensed to operate or collect fares.

They were phased out in the late 80s/90s meaning that anyone who became a Driver since then wasn’t issued with one (some bus companies did continue the tradition for a few years).

However, you can now get your hands on your very own personalised PSV badge. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Not a Driver or Conductor? No worries, why not use your initials for the traffic area and your date of birth for the identification number.

Each badge is handmade to order with the design heat pressed to the face of the badge. They’re 50mm in diameter and around 4mm thick. They also also have a pin badge on the rear for fixing.

If you’re planning to put yours in an authentic leather holder, please ensure that ‘rear fixing’ is unticked when ordering and we won’t attach a fastening so it fits snuggly in your pouch.

Proudly made in Britain.

Organise all those takeaway menus on the fridge with this PSV badge themed magnetic clip.

Customise it with a role, location code and number. Measures 35 × 29 × 22mm with insert measuring 25mm (as per the leather keyrings).

Please note, due to the size, the text on the Drivers design has been changed to white on red (as apposed to black on red) - looks better to be honest….

Hot on the heels of our popular replica PSV badge is this leather keyring.

Customise it with a role, location code and number. Insert measures 25mm in diameter with the keyring being 38 (w) x 92 (h) mm (inc. ring).

Please note, due to the size, the text on the Drivers design has been changed to white on red (as apposed to black on red) - looks better to be honest….

Made in the UK.

Multi-buy! LIMITED TIME OFFER

Buy two for £14.00 (save £2.00) - discount applied automatically at checkout.

35mm design pre-order for dispatch from 14 August 2026

Our unique replica PSV badges have proved so popular, we’re rolling the design out to our keyring range.

PSV badges were worn by Drivers (red) and Conductors (green) and assisted with identifying them to the public and showed they were licensed to operate or collect fares.

They were phased out in the late 80s/90s meaning that anyone who became a Driver since then wasn’t issued with one (some bus companies did continue the tradition for a few years).

However, you can now get your hands on your very own personalised PSV badge style keyring. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Choose from either 35mm or 50mm (width) design, made from metal (sourced in the UK) and printed and pressed here in Birmingham. Each keyring has the design printed on both sides.

Our unique replica PSV badges have proved so popular, we’re rolling the design out to our metal coaster range.

PSV badges were worn by Drivers (red) and Conductors (green) and assisted with identifying them to the public and showed they were licensed to operate or collect fares.

They were phased out in the late 80s/90s meaning that anyone who became a Driver since then wasn’t issued with one (some bus companies did continue the tradition for a few years).

However, you can now get your hands on your very own personalised PSV badge style coaster. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Each coaster is 90mm in diameter, made from metal (sourced in the UK) and printed and pressed here in Birmingham. There are four cork pads on the bottom to protect the surface of where they’re placed.

Please note, multi-buy is not available on this personalised item.

Pre-order for dispatch from 14 August 2026

Now here’s a blast from the past! PSV badges were worn by Drivers (red) and Conductors (green) and assisted with identifying them to the public and showed they were licensed to operate or collect fares.

They were phased out in the late 80s/90s meaning that anyone who became a Driver since then wasn’t issued with one (some bus companies did continue the tradition for a few years).

However, you can now get your hands on your very own personalised PSV badge. Meticulously redrawn from the original, these can be personalised with your traffic area and also role number (a list of traffic areas are shown in the gallery opposite).

Not a Driver or Conductor? No worries, why not use your initials for the traffic area and your date of birth for the identification number.

Each badge is handmade to order with the design heat pressed to the face of the badge. They’re 50mm in diameter and around 4mm thick. They come supplied in a gift tin with matching topper, perfect for gifts. They also also have a pin badge on the rear for fixing.

If you’re planning to put yours in an authentic leather holder, please ensure that ‘rear fixing’ is unticked when ordering and we won’t attach a fastening so it fits snuggly in your pouch.

Proudly made in Britain.